Accurized Caliber Conversion Kit | .264 (6.5mm)

Moves an Accurized Series micrometer seating die to .264 (6.5mm). The die body does not change.

Both seating stem profiles are cut for this caliber, tangent/hybrid and secant. Each contacts the bullet as low on the ogive as possible, near the bearing surface, where the profile is most consistent, so the nose is left unmarked and base-to-ogive spread stays tight. The case alignment sleeve is caliber-specific and carries the spring-loaded centering that squares the case to the bullet before the stem makes contact.

In the kit

• Tangent / hybrid seating stem, .264 (6.5mm)
• Secant seating stem, .264 (6.5mm)
• Caliber-specific case alignment sleeve

Requires an Accurized Series micrometer seating die body.