Casefeeder | RL550 Series
An automatic casefeed system, similar to the one used on Dillon's commercial-grade Super1050 machine and the XL750, is now available for your RL550 series press. You simply dump a quart of cases into the hopper and turn it on. The motor-driven disc fills the casefeed tube, a micro-switch shuts off the motor when the tube is full, and automatically restarts it when low. This case feeder only works for the handgun calibers listed under the casefeed caliber conversions. Rifle cases are too tall to feed with this system. Operates with 110/220v & 50/60hz to accomodate both domestic and foreign power.
Please see notes tab below for a guide on selecting options.
All options and recommendations listed below appear in the configuration menu.
A casefeed plate is required for operation of the casefeeder. If you do not already own the appropriate plate for your caliber, select it from the casefeed plate options based on the information below :
- Small Pistol : .32 / .380 / 9mm / .38 Super
- Large Pistol: .40 SW / 10mm / .38 Spc +
Caliber Conversion Kits
- Cost of the casefeed caliber conversion is separate from the 550 casefeed system - add a caliber conversion to the cart using the option menu.
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and reproductive harm. For more information, go to https://www.P65Warnings.ca.gov