Carbide Rifle Dies | Individual & 3 Die Set

Dillon Dies are engineered to give the very best performance, durablity and reliabilty on your Dillon Reloader.  Hand made in the USA from the highest quality sintered carbon , our dies are hand finished to exact standards.   All Dillon Rifle Die sets include our size / depriming die,  seating die and a separate crimp die (taper crimp for auto cartridges, accu-crimp for revolver cartridges).

NOTE: These dies are NOT compatible with the Square Deal B. If you have a Square Deal B, order dies HERE

Please be aware that Dillon Dies are heavily backordered.  Please check the Backorder Status  tab below for approximate lead times.

From $105.00

To $350.00

In stock
SKU
S000072
Choose Options

* Required Fields

Options Selected
Carbide Rifle  Dies | Individual & 3 Die Set
Carbide Rifle Dies | Individual & 3 Die Set

In stock

$105.00

Summary

    Sizing/Depriming Die

    The sizing/depriming die is full-length and sized to minimum tolerances to size cases down to function in both semi and fully automatic firearms. We strongly suggest that a headspace case gauge be used to correctly adjust the size die.

    For high volume users, such as commercial reloaders, law enforcement agencies, and high power or service rifle competitors, we also offer .223 and .308 die sets with a full-length carbide sizing die. Lubrication is still required, but the increased scratch resistance and die longevity of carbide are of great benefit to these groups of users.

    The depriming assembly includes a carbide expander ball for "squeak-free", effortless, neck expansion. This expander ball is located in the middle of the depriming stem to take advantage of superior initial leverage for easier extraction.
    In the event of a stuck case, the design of the depriming assembly allows it to function as a stuck case remover.

    Bullet Seating Die

    Our bullet seating die is internally designed to keep the bullet straight throughout the seating process. Once properly adjusted, the only measurable runout will be that which is inherent in the bullet.

    Crimp Die

    The taper crimp die is also specially configured to center both the case neck and the case body, thereby aligning the entire cartridge for a more uniform crimp. Dillon Rifle Dies are designed to meet the more rigid requirements for both accuracy and precision demanded by today's marksman.  A taper crimp die is preferred for loading ammunition intended to be used in semiautomatic firearms with detachable box magazines, and in lever-action firearms with tubular magazines.

    Rifle headspace case gauges assist in proper size die adjustment and in checking cases for whether they need to be trimmed. Essential for long case life, especially with semi-automatic firearms! Dillon Precision headspace case gauges are made of stainless steel for long life.

    We strongly recommend using a headspace case gauge when loading bottleneck rifle cartridges - order from the available options in the configuration menu.

    LEAD TIMES FOR COMMON BACKORDERED PRODUCTS

    STOCK & ORDERING NOTE :

    Due to unprecedented demand, we are not accepting backorders on out of stock magazines, bullets, brass and some other items.    Our future cost and delivery are uncertain at this point.  If you see an item that displays "Out of Stock" that means we hope to get it back in stock but do not allow backorders.  Items that say "backorder" means the item IS expected back in stock and you may backorder it.  

     

    IMPORTANT NOTICE ABOUT DIES:

    Dillon Precision has added a second domestic carbide supplier. Their job is to make large quantities of a single caliber handgun carbide insert. They are finishing 45ACP now and beginning 38/357. After they finish those calibers, the next two they will make are 10mm/40 S&W and 380ACP. Our primary carbide supplier is currently concentrating on 300 Blackout and 223 Remington. They are also making small quantities of handgun carbide in the calibers not coming from our new supplier. The dates below are our current estimate for delivery, based on recent delivery history and knowledge of what we expect to be delivered and when we expect to receive it.

     

    Reloading Machines:

    • Square Deal B - Refer to caliber lead times
    • RL550C - In Stock
    • XL750 - In Stock
    • Super 1050 - Refer to caliber lead times
    • Super 1050 (no dies) - In Stock
    • RL1100 - Refer to caliber lead times
    • RL1100 (no dies) - In Stock
    • CP2000 - In Stock
    • SL900 - In Stock
    • Essentials Packages - 60 weeks (dies)

     

    Carbide Die Orders Placed Before 9/1/2022

    • 9mm 24-36 weeks
    • .45 ACP 6-10 weeks
    • .38 / .357 6-10 weeks
    • .38 Super 36-42 weeks
    • 10mm / .40 36-42 weeks
    • .32 S&W 36-42 weeks
    • .380 ACP 36-42 weeks
    • .357 SIG 42-46 weeks
    • .44 SPL / Mag 36-42 weeks
    • .223 18-24 weeks
    • .300 Blackout Caught Up
    • .308 18-32 weeks

     

    Carbide Die Orders Placed AFTER 9/1/2022:

    • 9mm 42+ weeks
    • .45 ACP 10-14 weeks
    • .38 / .357 10-14 weeks
    • .38 Super 44+ weeks
    • 10mm / .40 44+ weeks
    • .32 S&W 44+ weeks
    • .380 ACP 44+ weeks
    • .357 SIG 48+ weeks
    • .44 SPL / Mag 44+ weeks
    • .223 24-30 weeks
    • .300 Blackout 1 week
    • .308 36+ weeks

    Common Conversion Charts For All Machines

        WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and reproductive harm. For more information, go to https://www.P65Warnings.ca.gov

    Dillon Precision Products, Inc. © 2022 | All Rights Reserved | 8009 East Dillons Way Scottsdale, AZ 85260 | 800-223-4570