Machine Parts | Belted Magnum Powder System

Magnum rifle cartridges can require from 70 grs to well in excess of 100 grs for a single charge. Our new Belted Magnum Powder System features a new, maximum-capacity, steel powder bar that can dispense more than 100 grs of extruded IMR powder. Our new powder system can be used with your RL550, XL650 or BL550 reloader, and is ideal for loading large-caliber, magnum rifle cartridges. We tested this system with various extruded rifles powders and found that powder charge variations stayed within plus-or-minus three-tenths of a gr. The Belted Magnum Powder System is based on our SL900 Shot Dispenser, so the Maximum Charge Bar won’t work in our standard powder measures - you’ll need to buy the entire system. The good news is that the Belted Magnum Powder System has an integral drain, so its easy to empty the hopper in order to change powder types. If load several big calibers with various powders, its easy to switch from one to another. Keep plenty of extra powder on hand, because when you’re dispensing 100-plus grs into every cartridge, you’re gonna need it! Note: Toolhead and toolhead stand are not included.
In stock
Low Stock: Only 3 Remaining

    WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and reproductive harm. For more information, go to

Dillon Precision Products, Inc. © 2022 | All Rights Reserved | 8009 East Dillons Way Scottsdale, AZ 85260 | 800-223-4570