Powder Measure Assy | XL750 / XL650 / RL550
The Dillon Precision Powder Measure for the RL550 Series and XL750/650 Reloading Machines represents the best in accurate, reliable and repeatable performance. Accurate to within +/- .10 grain the Dillon Powder Measure provides you with the speed and performance that the modern reloader demands. Perfect for competition reloading as well as hunting and recreational uses the Dillon Precision Powder Measure is the perfect accompaniment to The World's Finest Reloading Machines.
The powder measure is case activated; it will only drop powder if a case is present. When a case is present the powder bar will travel it's full length until is flush with the body of the powder measure. This allows the powder bar to align with the powder funnel to drop the powder charge. The case activated feature saves you from messy spills while you setup your press or if for some reason a case is not present when you cycle the press.
The Dillon Precision Powder Measure uses an adjustable volumetric powder bar to regulate charge weights. This is accomplished by adjusting a screw on the end of the powder bar which in turn regulates the size of the volume into which the powder will drop. You must use a reliable scale to set the correct charge weight as you adjust the volume the powder bar will drop. Dillon Precision manufactures four types of powder bars:
- Extra Small – Used for dropping less than 3 grains of powder
- Small – Used for dropping 3 to 20 grains of powder (Included with the Dillon Precision Powder Measure)
- Large – Used for dropping 20 to approximately 45 to 50 grains of powder (Included with the Dillon Precision Powder Measure)
- Magnum – Used for dropping 50 or more grains of powder*
This Dillon Precision Powder Measure is for the RL550 Series and XL650 Reloading Machines.
For long grain extruded powders we recommend the Redding Match Grade Model 3BR powder measure be used with the Dillon Powder Measure Adapter and RL 450 Powder Die.
Larger diameter cases require the Dillon X-Large Powder Die. These include; the 500 S&W, 50 AE, the WSM and WSSM family of cartridges, the RUM and RSAUM family of cartridges, .378 Weatherby and up, .338 Lapua, and 416 Rigby.
You might also like:
- The Dillon Low Powder Sensor to help remind you to keep that powder hopper filled.
- The Dillon Powder Check to make sure that your cartridges have the correct powder charge.
- The D-Terminator Electronic Scale for fast, accurate, charge weights.
- Spare Powder Funnels for reloading new cartridges or replacing lost funnels.
*For Belted Magnums, which can require 70 to 100 grains, or more, of powder we recommend our Belted Magnum Powder System. For more information, or to order the Belted Magnum Powder System, click here.
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and reproductive harm. For more information, go to https://www.P65Warnings.ca.gov