• XL 750 Reloader
  • XL 750 Reloader
  • Vimeo Video

XL 750 Reloader

Stock Number: 75076
The Dillon XL750 is a high-speed progressive reloading machine designed to load common rifle and handgun cartridges, from 17 Hornet though the common belted magnum cartridges in rifle, and 32 ACP through 500 S&W in handgun. Machine height from the bench is 32" without the optional electric case feeder, 38 1/2" with the electric casefeeder installed.

The XL750 comes with a lifetime warranty against manufacturing defects and normal wear and tear.


The XL750 is shown with the following options:
Electric Casefeeder
Roller Handle
Strong Mount
Bullet Tray
Powdercheck Die
Low Powder Sensor
Die set

CONFIGURATION NOTE: the XL750 does not support the combination of our Dillon 3-die set, a low powder check and a Mr. Bullet Feeder.

NOTE: This package contains backordered product - while we are doing everything we can to alleviate that situation, with all that is going on right now, demand is extremely high and supply is short. For your convenience, we have provided a lead time estimate on THIS PAGE, updated weekly.

Caliber Selection Notes:

* Indicates that this cartridge requires use of the Extra Large Powder Die #21253, sold separately.
** Indicates that this cartridge requires the Magnum Rifle Casefeed Kit #11069, sold separately.
*&* Indicates that this cartridge requires both the Extra Large Powder Die #21253 AND the Magnum Rifle Casefeed Kit #11069, each sold separately.

Select Caliber (required):
  • The basic XL 750 includes the following:
    • 1 powder measure with standard large and small powder bars (small bar installed). The small bar throws from 2.1 to 15 grains of powder. The large bar throws from 15 to 55 grains of extruded powder or up to 60 grains of ball/spherical type powder.
    • 1 primer system with large and small priming parts (appropriate size installed).
    • 1 large and one small primer pick-up tube.
    • Low Primer Alarm
    • 1 loaded cartridge bin
    • 1 toolhead
    • 1 powder die
    • 1 caliber conversion kit - Note: You must select this from the dropdown menu; adds it's cost to the cost of the loader.
    • 1 set of standard Allen wrenches

    You will also need (at a minimum):
      We also suggest the following:

    To change calibers, you will need:
    If you want to leave your dies preset, you'll need: