Rapid Trim 1500 Size/Trim Dies
Stock Number: RT 1500 Dies
Dillon Precision trim dies are used just like a standard size die. The big difference is that while you are pushing the case into the die to size it, a 1/4 horsepower electric motor driving a carbide cutter is trimming the case to length. Trim dies, in all calibers, are compatible with both the older RT1200 Trimmer as well as the current RT1500 Trimmer.
Please note: The upper trim die lock ring is not included with the trim die. If you want to order this, search 13559
Short Cartridges, like the 300 Blackout, must use our Short Trim Die Toolheads. These are available by following these links:
RL 550 Series
Our 6.8 SPC, 300 AAC Blackout, and 7.62 x 39mm trim dies must be used in conjunction with the Short trim Die Toolhead, due to the shortness of the case.
Please Note: The 300 AAC Blackout trim die cannot be used on the RT1200 to shorten .223/5.56mm into 300 AAC Blackout.
Please Note: The .6.5 Creedmoor trim die is not dimensioned for use in the RT1200 Trimmer at this time.
Choose a trim die by cartridge type from the drop down menu below.