JP | AR-15 Trigger Spring Kit

Spending $140 or more for trigger parts on every AR-type rifle you may own may not be realistic. If you can't quite pop for our complete trigger kit, or have too many rifles and can't justify expensive triggers in all of them, then this may be for you. You can achieve a significant improvement over stock parts by using a set of our custom trigger/hammer springs and the Rydol sear compound. With proper sear and hammer notch preparation, a livable 4.5 to 5.0 smooth trigger in a rifle with standard trigger components is possible. It will not have the extremely short engagement/over travel feel like the JP trigger, but you will have a smooth "roll-off" feel that will give usable trigger control. The spring kit includes trigger, hammer and disconnector spring and complete instructions on how to prep your parts for best results. Note: Use of this spring kit requires the use of US manufactured (domestic) ammunition or reloads with domestic (non-NATO spec) primers as ignition reliability will be reduced with hard low sensitivity primers as found in made foreign made ammunition and NATO specification ammunition. Use these parts only in rifles for recreational or competition shooting. Do not use this spring kit for any defense or duty applications or any AR-10 type rifle. Order the #12590 for AR-10, duty or defense applications.
$10.99
In stock
Low Stock: Only 2 Remaining
SKU
12618

NOTE THIS IS A RESTRICTED & REGULATED PRODUCT.     Some US States and countries / territories  outside the USA do not allow shipment of this product.   Note that USA means the 50 United States,  not APO / US Territories.     If you have a restricted item in your shopping cart and you cannot check out , please remove it. Magazines : 

  • California: 10 round limit
  • Colorado: 15 round limit
  • Connecticut: 10 round limit
  • District of Columbia: 10 round limit
  • Hawaii: 10 round limit (Pistol magazines only).
  • Illinois (Cook County): 10 round limit
  • Maryland: 10 round limit
  • Massachusetts: 10 round limit (unless customer supplies a copy of a license to possess high capacity magazines. Phone-in orders only)
  • New Jersey: 10 round limit
  • New York: 10 round limit
  • Oregon: 10 round limit
  • Vermont: 10 round limit (rifle) and 15 round limit (pistol)
  • Washington: 10 round limit

MAGAZINES ARE NOT SHIPPED OUTSIDE THE (50 States) USA - NO EXCEPTIONS

Firearm Parts & Shooting Accessories Outside of USA: 

  • Firearm parts not shipped outside USA (triggers, stocks, barrels, bolts, receivers)
  • Moon clips, speed loaders not shipped outside USA

Bullets, Brass,  & Other Components:

  • Live ammunition not delivered to California, Hawaii, Connecticut, Maryland, Massachusetts,  New Jersey, New York, Vermont, Washington DC, Alaska, Washington, Illinois, Rhode Island or any non-50-state US Territory / APO

    WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and reproductive harm. For more information, go to https://www.P65Warnings.ca.gov

Dillon Precision Products, Inc. © 2022 | All Rights Reserved | 8009 East Dillons Way Scottsdale, AZ 85260 | 800-223-4570