Square Deal B 9mm Sizing
February 2nd, 2016 at 10:53am
My 20 year old Square Deal B in 9mm Para seems to be no longer sizing my brass enough to fit in all chambers. If you compare the brass from the Dillon to brass sized in other sizing dies I know to be good, you can see a difference.<br /><br />I have full length re-sized the brass before going through the Dillon and then there are no problems. But I don't want to have to do this all the time.<br /><br />Is it possible something has worn out? The machine had always been fin in the past. Is there something I can replace. I'v just never heard of a sizing die wearing out before. Any information would be greatly helpful.
RE: Square Deal B 9mm Sizing
February 2nd, 2016 at 1:12pm
I strongly suspect the blue plastic friction plate is worn. Please email us a request for one, and include your mailing address.