• RL 1100 / CP 2000 / Super 1050 Toolholder with Wrenches
  • RL 1100 / CP 2000 / Super 1050 Toolholder with Wrenches

RL 1100 / CP 2000 / Super 1050 Toolholder with Wrenches

Stock Number: 1100 toolholder
Note: All RL1050 and Super 1050 machines produced prior to July 3, 2014 will require the toolholder with the bracket, #62202. After that date, all Super 1050s are equipped with a bracket that will accept the toolholder#62203. This date is stamped on the barcode label on the machine box.

All RL1100 machines use the #62203.

The CP2000 uses the #62202 toolholder with the bracket, and requires an additional 1/4-20 bolt #13685.
Bracket (required):
QTY: