1 post
Joined April 2020

Part 13921

I upgraded my powder measure from the old spring system. Part 13921 fell out. I cant find how to re install it. Is it necessary? How is it reinstalled.
58 posts
Joined October 2008

RE: Part 13921

Part 13921Powder bar spacer plug is used to hold spacer 13644 in when you are using the small 20062 or extra small 20780 powder bars. It is not needed on the large or extra large powder bars. The plug is just pushed in the hole in the housing and into the hole in the spacer. Otherwise the spacer will slide and possibly come out spilling powder. The plug should have a large top with a smaller extension on the bottom to fit in the hole and reach the spacer. If the plug is broken and doesn't reach the spacer it will need replaced if you are using the small or extra small powder bars