rsimmons
rsimmons
2 posts
Joined September 2013

How to Install Ejector WIre

Is there a trick or what's the proper way to install the ejector wire...

Manual is unclear...

Thanks

dillon
Administrator
dillon
3,074 posts
Joined July 2007

RE: How to Install Ejector WIre

The short bend goes into the hole in the shaft adjacent to station 1. The wire goes into the groove formed between the edge of the shellplate bolt and the recess in the shellplate. The wire goes behind the shellplate bolt, not across it at all.

 See Figure 6 in the SDB manual