GeorgeToon
GeorgeToon
2 posts
Joined July 2011

Failure to prime

My 1050 is not priming every 25 rounds or so.

I am loading 223 with WC 844 powder and CCI primers

I have disassembled cleaned and lubed the moving parts and while it is smoother it is still missing primers.  I also changed the plastic adapter at the end of the primer tube. 

Any ideas?

Thanks
George
GeorgeToon
GeorgeToon
2 posts
Joined July 2011

RE: Failure to prime

Called Dillon Problem Solved.

I had left the Half Moon Stop off when I installed the primer slide. 

As I recall from the last time I called support not only was the called answered by a knowledgeable person he was polite and patient. 

That is the reason all my reloading equipment is blue. . .

Thanks
Dillon 
woodys45acp
woodys45acp
1 post
Joined December 2012

RE: Failure to prime

So What is the part you needed? I have a brand new Super 1050 doing the same thing.
smatrace.dch@q.com
smatrace.dch@q.co...
1 post
Joined March 2011

RE: Failure to prime

Clean your primer tube like you would a rifle bore except use alcohol. Also make sure the primer slide lines up perfectly with the primer magazine tube. You may have to shim the half mood stop to get the mag tube aligned with the slide. The plastic tips aren't always perfectly aligned with the slide.