• CP 2000 Case Processing Machine
  • CP 2000 Case Processing Machine

CP 2000 Case Processing Machine

Stock Number: CP2000

NEW

Designed to complement our RL1100 and Super 1050 reloaders, the CP 2000 offers higher speed, greater versatility and added case processing capability... all at a much lower cost than dedicating a RELOADING machine to prep brass!
If you're loading mass quantities of ammo, the CP 2000 will make your task much easier.

The CP2000 comes with a two year limited warranty against manufacturing defects.

Note : this machine is to be used in conjunction with a reloader to speed up the reloading process. Traditionally in the past, another reloader was used for case processing, we now offer this dedicated machine to serve that purpose.

Note:No caliber conversion kit is included with the CP2000.
No Case Feed Plate is included with the CP2000. See casefeeder tab below.

Machine is shown with the following options:

Caliber Conversion Kit
Casefeed Plate
RT1500 Case Trimmer & Trim Die
CP2000 Short Trim Die Toolhead (Standard Toolhead included)
300 Blackout Conversion Kit
Universal Depriming Die
Backup Expander die

NOTE: This package contains backordered product - while we are doing everything we can to alleviate that situation, with all that is going on right now, demand is extremely high and supply is short. For your convenience, we have provided a lead time estimate on THIS PAGE, updated weekly.

Primer Swager Size (required):
QTY:  
$1,699.99
  • The Dillon CP 2000 Case Processing Machine features the Following :

    • Eccentric Roller Bearing Drive System
    • Smoother Operation, Less Effort
    • Higher Throughput , Lower Cost Per Case
    • Heavier Frame for Greater Rigidity
    • Seven Threaded Stations for More Flexibility
    • Upgraded Primer Pocket Swager
    • Primer Pocket Swage Available in Two Stations
    • User-Replaceable Swage Rod TipTwo Year Warranty
    • Reinforced Toolhead Bolt & Washer
    • Improved Shellplate Indexing System
    • Processing Speed up to 2000 Cases per Hour
    • One Year Warranty
  • The RL1100 uses a variable speed,universal voltage case feeder. Order for both domestic or foreign use.
    The speed of the casefeeder is controlled by a potentiometer on the casefeed funnel. It allows you to infinitely regulate the speed from 0 to 8 RPM.   The motor features a universal power supply for both domestic and foreign voltages. Adaptable to either 110 or 220 Volt, 60 or 50 hz, you simply swap out the plug to the style appropriate to your region.

    The bowl has an adjustable window cuff and cases deflector, for a larger range of cartridge capability.

    The basic CP2000 includes:
    • Built in primer pocket swager
    • Electric casefeeder(no casefeed plate is included)
    • The shellplate (not included with the CP2000) is auto indexing.
  • Important note : the included Casefeeder requires the purchase of a Casefeed plate which are listed below. The number of cases that the Casefeeder can hold will depend upon the cartridge type. Typically the Casefeeder will hold 600 38 Special cases or 500 223 Rem cases.

    Small pistol Casefeed plate
    .32, 380, 9mm, 38 Super, 30 Carbine
    Large pistol Casefeed plate
    40 S&W, 10 mm, 38 Special and larger, 7.62 x 39
    Small rifle Casefeed plate
    204 Ruger, 222, 223 Remington
    Large rifle Casefeed plate
    22-250 and larger