.50 BMG "BIG FIFTY" RELOADER

The "Big Fifty" Reloader is a four station semi-progressive press. With the heaviest built frame in the industry, made of high-strength ductile iron and high-strength carbon steel, finished in zinc phosphate parkerizing and black oxide, the BFR50 is suitable for match-grade ammunition as well as high-volume production ammunition.

 
The BFR50 comes with a one-year limited warranty against manufacturing defects.
From $1,949.00

To $5,861.98

In stock
SKU
S000222
Product Configuration
50000 - Base Reloader | .50 BMG (backorder) + $1,949.00

* Required Fields

.50 BMG "BIG FIFTY" RELOADER
.50 BMG "BIG FIFTY" RELOADER

In stock

$1,949.00

Summary

    The BFR50 includes:

    • Machine with .50 BMG caliber conversion kit (shellplate, locator buttons)
    • One primer seating die, with concave and flat seating punches.
    • One toolhead
    • One written instruction manual
    • One set of standard Allen wrenches

    All items above can be ordered using the configuration menu above.

     

     

     

    We suggest that you also purchase:

    • .50 BMG Trimmer Assembly #50050
    • .50 BMG Carbide Size Die #50075 
    • Powder Measure Adapter for RCBS .50 BMG Measure #50125
    • RCBS .50 BMG Powder measure #21896

    Note : A .50 BMG headspace case gage  #14447 MUST be used to adjust the size die

    Reloading with Dillon’s Big Fifty is EASY as 1-2-3-4-5!


    Most shooters realize that reloading is the most economical way to enjoy shooting their .50 BMG firearms, but many shooters are unaware of just how simple it is to reload. In fact, Dillon’s BFR 50 is one of the simplest reloading machines to learn to operate. The BFR enables you to complete all of the steps in the reloading process – one step at a time – without having to change (and then re-adjust) dies for each operation like you must with an old-fashioned single-station press. Skeptical? Follow this simple loading process: 

    Place an empty cartridge case into the BFR’s shellplate at Station One. Set a primer into the primer seating die in the top of station two. Lower the operating handle. The BFR will resize and deprime the case.
    Remove the sized, deprimed case from the shellplate, and insert it into the primer seating die in the top of station two. Lower the operating handle. The BFR will prime the case.


    Remove the primed case from the primer seating die, return it to the shellplate at station two, then rotate the shellplate by hand to station three.
    At Station Three, pull the handle down, then dispense your powder charge into the case. Raise the operating handle and advance the shellplate.
    At Station four, place a bullet on the powder-charged cartridge case and lower the operating handle. This will seat the bullet into the case. (NOTE: with some manufacturers die sets, it may crimp the bullet in place as well.) Raise the operating handle and advance the shellplate. Remove the loaded cartridge.


    Repeat steps 1 - 5 to crank out more ammo. Sound easy? You bet it is!

     

    .50BMG User Manual

    LEAD TIMES FOR COMMON BACKORDERED PRODUCTS

    STOCK & ORDERING NOTE :

    Due to unprecedented demand, we are not accepting backorders on out of stock magazines, bullets, brass and some other items.    Our future cost and delivery are uncertain at this point.  If you see an item that displays "Out of Stock" that means we hope to get it back in stock but do not allow backorders.  Items that say "backorder" means the item IS expected back in stock and you may backorder it.  

     

    IMPORTANT NOTICE ABOUT DIES:

    Dillon Precision has added a second domestic carbide supplier. Their job is to make large quantities of a single caliber handgun carbide insert. They are finishing 9X19MM. After they finish those, the next two they will make are 44 Magnum and 45 Colt. Our primary carbide supplier is currently concentrating on 223 Remington.  The dates below are our current estimate for delivery, based on recent delivery history and knowledge of what we expect to be delivered and when we expect to receive it.

     

    Reloading Machines:

    • Square Deal B - Refer to caliber lead times
    • RL550C - In Stock
    • XL750 - In Stock
    • Super 1050 - Refer to caliber lead times
    • Super 1050 (no dies) - In Stock
    • RL1100 - Refer to caliber lead times
    • RL1100 (no dies) - In Stock
    • CP2000 - In Stock
    • SL900 - In Stock
    • Essentials Packages - 60 weeks (dies)

     

    Carbide Die estimated Delivery Dates
    As of 02/19/2024, these are the estimated weeks before we begin shipping.

    • 9mm 6-8+ week
    • .45 ACP 18-20+ weeks
    • .38 / .357 24-30+ weeks
    • .38 Super 6-8+ weeks
    • 40 S&W/10mm In Stock
    • 32 S&W Long/32 H&R 44+ weeks
    • .380 ACP In Stock
    • .357 SIG 48+ weeks
    • 41 Magnum 48+ weeks
    • .44 SPL / Mag 10-12+ weeks
    • 45 Colt 16-20+ weeks
    • .223 size 2-4+ weeks
    • .300 Blackout 16-20+ weeks
    • .308 Winchester In Stock
    • 30-06 24-28+ weeks
    • 50 BMG 48+ weeks

        WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and reproductive harm. For more information, go to https://www.P65Warnings.ca.gov

    Dillon Precision Products, Inc. © 2022 | All Rights Reserved | 8009 East Dillons Way Scottsdale, AZ 85260 | 800-223-4570