carjock
carjock
4 posts
Joined November 2008

300 AAC Blackout on 1050 press

Can I use .223 conversion parts as well as .308 parts to reload the .300 AAC Blackout on my 1050 press? I have a RL and a Super 1050.  Has anyone done this? Any help or advice is greatly appreciated.
dillon
Administrator
dillon
3,047 posts
Joined July 2007

RE: 300 AAC Blackout on 1050 press

Use the AK powder funnel, and a small pistol case feed plate with a couple of spacer washers.
alex57fnh
alex57fnh
1 post
Joined January 2012

RE: 300 AAC Blackout on 1050 press

how about on a xl 650, should i do the same? thanks in advance.
dillon
Administrator
dillon
3,047 posts
Joined July 2007

RE: 300 AAC Blackout on 1050 press

The 650 works out the same. The shellplate and lower end parts are the same as 223, use the AK powder funnel.
admin3
admin3
1 post
Joined January 2013

RE: 300 AAC Blackout on 1050 press

Looking for the same answer. Wanting to reload 300 Black on my 1050 that was ordered yesterday.

Where can I pick up the dies? Which is the best brand? What exactly do I need?

New to reloading, so please forgive. We've all got to start somewhere, right!?!

DB
iroquois
iroquois
6 posts
Joined March 2013

RE: 300 AAC Blackout on 1050 press


Posted by: dillon
Posted on: 2012-07-17 at 09:03:53 AM
Use the AK powder funnel, and a small pistol case feed plate with a couple of spacer washers.


Hi,

Do you recommend using a small pistol case feed plate to load 300 blackout on the S 1050?


Dillon Super 1050 recipe for .300 AAC Blackout

Small pistol case feed:
https://www.dillonprecision.com/#/content/p/9/pid/23822/catid/3/Dillon_Casefeed_Plate_Small_Pistol

7.62 powder funnel:
https://www.dillonprecision.com/#/content/p/9/pid/25279/catid/48/Powder_Funnels



Thanks,

I