223 resizing die
January 19th, 2017 at 2:54pm
Hi, i just purchased a Dillon 223 3 die set. When i was setting up the resizing/decapping die the pin broke and the case neck was crushed. I put the replacement pin in and readjusted per instructions and the same thing happened. I removed the decapping assy and set up the resizing die and the case resized perfectly but with a case in the decapping assy can not be threaded into the die it seems like the carbide expander ball is too large but it measures .222 is the resizing ball suppose to be loose on the decapping pin?? Thanks for any help.
RE: 223 resizing die
January 21st, 2017 at 8:52am
You posted under the Mr. Bulletfeeder section. You might ask your question under the Reloading: Rifle Calibers section.