10-8 Performance Armorer Tool
The 10-8 Performance Armorer Tool is a simple nonmarring tool molded from glass reinforced nylon. It is useful for countless applications where use of metal tools can easily damage your work. It is approximately 5" long and 1/4" in diameter, and features a rigid chisel pointed end and a semi-flexible flat blade end. Radial gripping ridges are molded into the body of the tool to prevent slipping when working with greasy parts.
Uses for the Chisel:
Removal of the 1911 extractor by pulling on the firing pin stop grove or pushing on the claw
Pushing out the M16 firing pin retaining pin
Pushing down the spring plug of a 1911 during field stripping
Takedown of the Glock and S&W M&P slide
Unloading M16 magazines
Threading MOLLE accessories through webbing
Uses for the Flat Blade:
Pushing the 1911 thumb safety detent during reassembly
Pulling out the M16 firing pin retaining pin
Flipping down the sear disconnect lever on the S&W M&P
Use as a spatula for applying grease into supressors
**Please note that this tool is not meant to replace a steel pry tool, and will break if you try hard enough. If you need to pry this hard, use a metal tool. This tool will last a long time for its intended purpose