RL1050/Super 1050 |
 Print This Page |
Newsletter Sign Up Wish List Search 
|
Super 1050 for case prep
I have a friend who lost one arm to cancer but is interested in loading. it is c**bersome for him to stand the bullet up on the case, then grab the handle for each cycle. Does Dillon make an automatic bullet feeder for 223 rem bullets? Also, I have access to LOTs of 5.56 military cases (178,000) and am wondering if the Dillon has the ability to be used for a high volume case preparation machine (deprime, size, primer pocket swedge, trim)?
*This topic was filtered, login to remove language filter.
Login to reply to this topic
So far as I have been able to find there are two bullet feeder options for the 1050 (none from Dillon) The first one to old KISS bullet feeder is not available at this time. It is my understanding the two partners had problems and split up, causing legal problems. A new company has been formed and they expect to start selling again shortly (according to an email last month, but no date) The device will be around $550 and should feed .223 bullets. You can contact them at http://mrbulletfeeder.com/ The second company is at http://www.gsiinternational.com/rl1050.htm I do not believe they have a feeder for 223 bullets. They are also more expensive. You might also want to look at this company which makes an electric motor ($850) to cycly the 1050 machine at either 900 or 1200 times per hour. Just keep the hoppers filled. http://www.reloaders.com/catalog/product_info.php?product 178k in cases is way too much for one person to have :-) Let me know if you want to part with some of that unprocessed brass, so I can process on my 1050. The 1050 should do a reasonable job of sizing, depriming, swagging and trimming etc. cleaning, lubing, then processing and tumbling to take the lube off will take some time. Hope this helps.
I want to buy some too!!!!!!!!!
Email me with details
virata@mudloggingsupply.com Loading:
|
