The "finished round chute"  that drops the final round off the press into the holding box  -  has a tendancy to bend away from the frame, especially as the box of finished rounds gets heavy,  and then it hangs up as the press shaft moves down to complete a cycle.      I've bent it back into place  with some success  /  but it kind of has a memory now.

My solution was to drill 2 holes in it  -  and then using a plastic cable tie  -  tie it in place around the frame.    It seems to me a better solution  to  beef up the bracket  /  or change the attachment system  with some kind of a retrofit.   Is there anything in the works ?