Print This Page
Cartridge Case Bin Bracket
|
By woolleyworm
Published on: 2011-03-13 at 6:37 PM |
Replies: 0
|
Has anyone else had problems with the roller handle hitting the bracket, not allowing for full range of motion? This is a new bracket and strong mount along with a new roller handle. I was thinking about trimming the bracket, but that would remove the tab for the case bin to sit on. Any thoughts? Thanks for the help.
Login to reply to this topic
|
Posted by: dillon
Posted on: 2011-03-17 at 11:03:37 AM
|
he original handle on your machine, was it straight or did it have a slight bend in it?
|
|
Posted by: woolleyworm
Posted on: 2011-03-20 at 06:03:12 PM
|
I think I answered my own question, I had the machine completely tore down for cleaning and lube. I got the strong mount and roller handle in the mail before i had everything put back together..... in a rush to try it out, I forgot that I had not put the priming system back together yet...... :oD The ram was coming down completely and without the priming system installed; the throw on the handle was not as it should be. All ok now ! Maybe someone else can learn from my haste !
BTW - The strong mount is great and the roller handle should be included, even if it adds to the price a little. Scrap the straight handle and do it right !
