Print This Page
I currently have a SDB and am set up to reload .38 super. Can you tell me the part number I will need to convert to 9mm?
Thanks
Login to reply to this topic
|
Posted by: dillon
Posted on: 2012-01-12 at 11:15:47 AM
|
38 Super size die #22208
38 Super crimp die #12473
All other parts are interchangeable with 9mm
|
Posted by: tbarnes65
Posted on: 2012-01-12 at 11:56:32 AM
|
Thanks but I was needing to go from 38 super to 9mm so I am assuming I need the following?
22206 9x19 sizing Die
12497 9x19 Crimp Die
|
|
Posted by: dillon
Posted on: 2012-01-13 at 09:36:22 AM
|
Correct.
|
|
Posted by: tbarnes65
Posted on: 2012-01-23 at 06:22:35 PM
|
I purchased the 22206 and 12497 dies but I am having an occasional problem. In the seating stage (3) for some reason it occasionally peels the top of the brass back on the top of the brass where the bullet seats. It is just on on side of the brass and pushes it down about 1/4" over about 1/5th of the brass. I am using 124gr FMJ and starline brass. Anuy idea's?
|
|
Posted by: dillon
Posted on: 2012-01-24 at 09:34:51 AM
|
How much are you flaring the case mouth? It needs to be flared at least .010" larger than the case mouth of a sized, unflared case.
|
|
Posted by: tbarnes65
Posted on: 2012-01-28 at 10:39:38 AM
|
Thanks, that solved my problem.